AuroraNow

Camera settings for northern lights

Start with an exposure of a few seconds, check the stars for focus and adjust as the sky changes.

Set up your first shot

Put the camera on a tripod, turn off flash and select manual mode with a fixed ISO. Shoot RAW if you plan to edit. At f/2.8, try 4 s and ISO 1600, then review the shot. With an f/4 zoom, ISO 3200 gives roughly the same displayed brightness at the same shutter speed. You can also double the exposure if the aurora is moving slowly.

Focus on a star

Magnify a bright star in live view. With manual focus, turn the ring until the star is as small as you can make it. Check the result on a magnified photo. Refocus after zooming or if the temperature drops sharply.

Adjust based on the test shot

If stars look sharp but folds in the aurora blend together, drop from 4 s to 2 s. Adjust the ISO if the shot gets too dark. If bright green areas lose detail, check the RGB histogram and reduce the exposure. The table assumes a lens near f/2.8 and gives starting points.

Three exposures to try

What you seeShutter speedStarting ISO
Bright, fast-moving curtains1–3 s1600–3200
Slowly rippling bands4–6 s1600–3200
Faint, almost still arc8–12 s3200–6400

Sources and manuals